EMAIL US: customerservice@franklinyoung.com
CALL US: (618) 724-2780 / (909) 931-5012
CALL US: (618) 724-2780 / (909) 931-5012
Back to Previous Page
ITEM#: 3042-ZFTPS42TC
MFR#: ZFTPS42TC
These piezoresistive transmitters are specially designed for applications in bioreactors and autoclaves. The transmitters can be used up to +150 C, a temperature at which they can work continuously.The sensor element is a chip of silicon, micro-machi
| Product Name | Description | Item# | QTY | |
|---|---|---|---|---|
Water Sensor Extension Water Sensor with Cable for water purification systems, To be connected in series to a primary water sensor (ZFWATDET4). For use with Milli-Q(R) HX Systems
|
The water sensor is an accessory for water purification systems. It enables shutdown of the feed water supply in case of an unlikely event of a leak. The sensor detects water spillage on the floor and automatically closes the stand-alone inlet soleno | 3042-TANKLK002 | EA | |
Air Gap Device For use with Milli-Q(R) CLX, HX, and HR 7000 series water purification systems.
|
This accessory can be connected directly to a 10 mm OD tubing to provide protection from bacterial contamination on the reject tubing. | 3042-AIRGAPXL2 | EA | |
UV Loop Kit For Milli-Q(R) HX 7000 SD series water purification systems
|
The UV loop kit with a power consumption of 57 W is for use with Milli-Q(R) HX 7000 SD series water purification systems. | 3042-ZLXLKITUV57 | EA | |
External Pretreatment-XL System Cable for use with Milli-Q(R) HX/HR/CLX 7000 series water purification systems
|
The external pretreatment cable is used to transmit an open/closed type of signal to the system when a pre-treatment device is not producing water due to automatic maintenance (i.e. softener regenerating). When the UF pretreatment unit (ZUFPREUN0) is | 3042-ZLXLPTCAB | EA | |
Loop Panel Assembly Kit For use with Milli-Q(R) HX 7000 SD All-in-One water purification systems
|
For use with Milli-Q(R) HX 7000 SD All-in-One Water Purification Systems. | 3042-ZLXLSDL00PKIT | EA |